Elapsed Hour Meter
SunRay Quad includes an elapsed hour meter on the front panel to allow for consistent lamp replacement scheduling.
Lamp Power regulation
The system’s switch mode power supply with auto-ranging input maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life..
SunRay Quad includes a Standby Mode switch which reduces lamp power when the system is idling. This reduces excessive heat and therefore increases life of system components, without the need to power down.
Remote Control /Logic Interface
SunRay Quad can be remotely monitored and controlled using a connector on the rear of the unit.
|SunRay Quad as a UV Curing Chamber
SunRay Quad can also be easily connected to the optional Rayven Quad oven to create a powerful UV cure chamber.
|Parabolic Flood Curing System
|2400W (4 x 600W)
|200-240 VAC ±10%
|Input Current (Max)
|110 mW/cm2 UVA, typical
|16" x 12"
|Size (L x W x H)
|17.45” x 23” x 7.75”