SunRay Quad 600 UV Flood System

Features:
- 110 mW/cm2 intensity @ 4"
- Large 16' x 12" UV cure area
- Solid state - constant power
- Optional UV cure chamber
- Standby Power Switch
- 4 Long-Life Arc Lamps


About SunRay Quad 600 UV Flood Cure System
SunRay Quad 600 UV Flood Cure Unit is an economical, large area, high-power UV flood curing system. All components are incorporated into the lamp head which can be easily mounted on the Rayven Quad cure chamber, or anywhere on a factory floor, with virtually no cabling or remote power boxes required. Just mount the head, connect the AC line cord, and start curing! Four long-life 600 watt arc lamps and parabolic reflectors illuminate a large 16" x 12" curing area with evenly distributed UV light. The arc lamps are powered by the state of the art UV Power-Plus Lamp Driver.

Elapsed Hour Meter SunRay Quad 600 includes an elapsed hour meter on the front panel to allow for consistent lamp replacement scheduling.

Lamp Power regulation
The system’s switch mode power supply with auto-ranging input maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life..

Standby Mode
SunRay Quad 600 includes a Standby Mode switch which reduces lamp power when the system is idling. This reduces excessive heat and therefore increases life of system components, without the need to power down.

Remote Control /Logic Interface
SunRay Quad 600 can be remotely monitored and controlled using a connector on the rear of the unit.

	SunRay Quad 600 as a UV Cure Chamber SunRay Quad 600 can also be easily connected to the optional Rayven Quad oven to create a powerful UV cure chamber.

SunRay Quad UV Flood Information Sheet