SunRay 600 UV Flood Cure System

Features:
- 175 mW/cm2 intensity @ 3"
- 8" x 6" UV cure area
- Solid state - constant power
- Optional UV cure chamber
- Optional Stand & Shields
- Standby Power Switch

About SunRay 600 UV Flood Cure System
SunRay 600 UV Flood Cure Unit is an economical, high-power UV flood curing system. It is a compact system, incorporating all components into a small lamp head which can be easily mounted on the optional Stand & Shield, or anywhere on a factory floor, with virtually no cabling or remote power boxes required. Just mount the head, connect the AC line cord, and start curing! The long life 600 watt arc lamp and parabolic reflector illuminate an 8" x 6" curing area with evenly distributed UV light. The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver. The head features a convenient carrying handle and sliding height adjustment bracket..

Elapsed Hour Meter SunRay 600 includes an elapsed hour meter on the front panel to allow for consistent lamp replacement scheduling.

Lamp Power regulation
The system’s switch mode power supply with auto-ranging input maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life..

Standby Mode
SunRay 600 includes a Standby Mode switch which reduces lamp power when the system is idling. This reduces excessive heat and therefore increases life of system components, without the need to power down.

Remote Control /Logic Interface
SunRay 600 can be remotely monitored and controlled using a connector on the rear of the unit.

	Benchtop Mounting Options The SunRay UV flood system can be mounted at a range of heights with the optional bench-top Flood Stand, and can also be configured with the wrap around Front and Rear UV shields, as shown.
	SunRay as a UV Cure Chamber SunRay can also be easily connected to the optional Rayven oven to create a powerful UV cure chamber.

SunRay Information Sheet

Uvitron Flood System Mounting Options