SpotCure-B is covered under warranty for material and workmanship for a period of one year from the date of purchase, except for the LED emitter, which is covered for 6 months. This warranty covers typical UV spot curing applications for a medium use product. This warranty is void if excessive use of more than 50 percent duty cycle is determined as a cause of defect. The SpotCure-B unit employs a powerful LED emitter, and with that power comes internal heat. Not letting the unit cool down between cures will likely cause premature LED emitter burnout.
What is not covered under warranty:
Premature burnout of the LED emitter from extensive or over-use of more than 50 percent duty cycle is not covered under warranty. In other words, the unit must be OFF immediately following, and for at least the same time period it was ON to allow the emitter time to cool down.
Premature burnout of the LED emitter from using the unit more than one minute per cure. If your curing device is taking longer than one minute to cure your material, or you need to move the curing device around to cure all of the area needed, then you are using the wrong curing unit and need something either larger and/or more powerful. Using the SpotCure-B unit in this manner may cause premature LED failure and will void the warranty.